NGV Evod Tank
- 1 x MT3 Tank
- The MT3 Tank is perfect for beginners, but is one step above the CE4 tank. It is as simple as an electronic cigarette can be with a replaceable coil so that every time your coil burns out you can just buy a new coil rather than buying a whole new tank.
Filling up your MT3 is fairly easy. You can fill a MT3 with a standard juice bottle, but it may be easier for some to use the needle tip cap.
- Remove the base silver part of the tank by unscrewing counter-clockwise
- Hold the MT3 at a 45-degree angle and begin dripping e-liquid along the inside wall of the unit until it is filled to just below the bottom of the clear tube in the center. It will hold approximately 2.0mL of juice from empty.
- Make sure your coil is screwed in tightly to the base of the tank
- Replace base and screw it in clockwise
- Prime your tank (this means pull on the tank 5 to 10 times before using power on your device, this will help juice flow into the coil. If you do not do this, you may experience a burnt hit.
White, Black, Purple, Pink, Blue, Red, Green, Yellow, Stainless